Molly Grease 15Kg
Molly Grease used For The multipurpose nature of Molly Grease enables its use on both passenger car and commercial vehicle components including flexible joints pivot pins, cams, screw threads, spline shafts, slides and fifth wheels.
What is a Molly grease?
Molly grease is a special formulation that is used in situations where metal slides against mental under high pressure and is generally used on pinion gears and splines. This silvery black solid compound, which naturally occurs as the mineral molybdenite, is classified as a metal dichalcogenide
Introduction
SealXpert® Moly Grease is a lithium-based soap greases have excellent water resistance and shear stability. It is versatile grease recommended for general and wide applications.
Typical Applications
Suited to a wide range of applications, including bearings, gears, and sliding parts.
Colour Black
NLGI Grade #3
Worked Penetration, mm/10 265-295
Dropping Point, °C ≥175
Density at 20°C, g/ml 0.89
Base oil viscosity at 40°C, mm²/s 114
Service Temperature, °C (°F) -30 to 130 (-22 to 266)
Low temperature torque test at -20°C:
Initial breakaway torque, Nm 151
Torque after 20 minutes running time, Nm 59
Direction for Use
Clean the contact areas and apply with brush, spatula, grease gun or automatic lubricating device. Can be used in central lubricating systems.
Safety and Handling Consideration
Keep away from children.
This product may irritate the skin or eyes. Wear proper protective equipment.
Use with adequate ventilation. Wear gas or air mask as necessary.
Do not store with oxidizing agents.
Keep away from heat and sources of ignition.
In case of contact with skin, wash with water and soap. In case of contact with eyes, rinse with clean water immediately. Get medical attention if irritation develops and persists.
More details, please refer to MSDS of this product
Recommended Storage:
Stored in a cool and dry location in unopened containers at 8～28℃.
When stored in a cool and dark place in the original unopened containers, this products has a usable life of 60 months from the date of production.
Disclaimer: The information contained herein is considered accurate. However, no warranty is expressed or implied regarding the accuracy of the data, the results to be obtained by the use thereof, or that any such use will not infringe any patent. Before using, user shall determine the suitability of the product for the intended use and user assumes all risk and liability whatsoever in connection therewith.
Post a Comment