The Express Inhibitor Test provides a rapid on-site analysis of the concentration of all Fernox Protectors, and other molybdate based inhibitors, in central heating system water. Easy and intuitive to use, it is a quick and simple testing method to establish the presence of inhibitor within the system. Testing the concentration of inhibitor allows compliance with local regulations and best practice, and may be required to comply with boiler warranties.
Quick and simple on-site testing of inhibitor concentration
One test strip per system. Each pot contains 50 test strips.
Suitable for testing all molybdate-based inhibitors
Easy compliance with local regulations and best practice
Remedial action can be taken immediately for full system protection
Allows compliance with boiler warranties
The Express Inhibitor Test provides a rapid on-site analysis of the concentration of all Fernox Protectors, and other molybdate
based inhibitors, in central heating system water. Easy and intuitive to use, it is a quick and simple testing method to establish the
presence of inhibitor within the system. Testing the concentration of inhibitor allows compliance with local regulations and best
practice, and may be required to comply with boiler warranties.
- Take a sample of system water which is representative of the system as a whole (drain the water for several seconds before taking the sample)
- Dip the test strip into the system water for one second and remove
- Compare to color chart within 10 seconds
- Select the color which most accurately represents the colour observed on the test strip tom confirm the system is fully protected against corrosion and scale formation.
The test strips are supplied in a vial of 50 strips. The test strips are non-hazardous, but should be kept out of reach of children.
Package, Handling & Safety
The test strips are supplied in a vial of 50 strips. The test strips are non-hazardous, but should be kept out of reach of children.
Hubungi TOKO KIMIA BATAM
HP/WA: 081270868021
Post a Comment