Anti-Slip Floor Coating (NS38)-3.8 Liters

EFC38 Epoxy Floor Coating

PACKAGE:

3.8 litres/set

EFC38 Epoxy Floor Coating

FEATURES:

• Two-component epoxy floor and deck coating
• Easy and fast to apply
• Fire retardant in the cured state
• Resists gasoline, oil, acids, alkalis and aliphatic solvents

APPLICATION:

Finish for concrete and steel ramps, walkways, locker rooms, loading docks, marine applications, machine rooms assembly areas and stairs

 

TECHNICAL DATA:

• Volume of solids: 62 %
• Mix ratio – by weight: 7.5:1
• Mix ratio – by volume: 4.4:1
• Coverage – Roller: 4.6 m² per 3.78 l (50 ft²/gal)
• Coverage – Trowel: 3.7 m² per 3.78 l (40 ft²/gal)
• Dry time at 21°C: 12 hours

Direction for Use 

Surface Preparation:

• All surfaces to be coated should be sound, clean, dry and free of all contaminants.
• Loose dirt and dust are best removed by a stiff bristle brush or by blowing down with dry, oil-free compressed air.
• Oil, wax and grease should by removed by dissolving in a water-based cleaner/degreaser. Rinse thoroughly with fresh water while the dissolved solution is still wet. An alternate method is to clean with appropriate solvents such as mineral spirits as per SSPC-SP-1. It is important that the solvent be removed from the surface while still liquid and not be allowed to evaporate during the cleaning process and redeposit oil or grease on the deck. Ample solvent should be applied to the surface to completely dissolve the grease and oil. The solvent containing the dissolved grease and oil should be wiped up with clean rags before the solvent dries.
• Depending on concentration and type, chemical contamination should be removed by detergent power washing followed by a liberal fresh water while the detergent is still wet. Allow surface to completely dry.
• After cleaning, any remaining loose particles should be removed by brushing or blowing with dry, oil-free compressed air.

Related product you might see: